Best Gen 3 motor mounts for old cars???

What is the best motor mount conversion for 65 Coronet stock K-member 6.1 hemi about 750hp?

I don't know if they're the "best" but the TTI mounts were the only ones I could get as Schumacher never answered or returned emails or calls. I will say the TTI's bolted right up a s I had no problem getting the engine in. I paired mine with some Moroso solid mounts, again no issues with fitment.

Do not use these!
They split before we even fired the engine!

We switched to the second ones.

These are not my photos as I just grabbed them for reference.
I can dig up the photos to show the damage if anyone needs them.

Who makes them?

Post pics please. What did TTI say when you shared the pics with them?

If you can get Schumacher on the horn to place an order, more power to you. He was MIA for me so the TTIs were the only game in down.

Mancini makes/sells the good ones.

The junk ones came from magnum force. Not sure where they purchased them from..?

I'm hoping to do a test fit in my coronet the end of the month, I bought from bouchillon performance. I did have to grind the block on the dr's side a little

Mancini doesn't make them, they repackage product and are only a vendor.

I got my engine in this weekend. I had to grind on the ear of the mount to fit the K member and the nobbies that fit in the mount pads were tight, but eventually got the engine to sit down in them. 727 hooked to it and the cross member bolted all in just fine as well.