Pushrod length

Just wondering on pushrod length.
I have hellcat heads and lifters on my 6.1.
Will they be the same length or longer than the 6.1?

Hellcat lifters in a 6.1 ? with Hellcat heads ? they might be short ,

If I remember correctly the BGE/Hellcat/Apache and Eagle heads the rockers are raised slightly compared to the 5.7/6.1s ,I know they (5.7s and 6.1) are different heads but I think they have the same shaft height.

I agree with Ray you need a Eagle/BGE/Hellcat/Apache pushrod length.
Stock Eagle pushrods are 6.800 and 8.140...I would measure for your application

Thanks
I think they need to be longer.
The deck heights are the same so it should need the longer push rods with longer valves