6.2 Hellcat Heads +400cfm

https://www.youtube.com/watch?time_continue=85&v=W8Sj95Jvk94

Ooffta!!! This program would work on a Apache heads as well.

BTW, we’re you looking for a distributor for a Gen III you were wanting to run? I saw member RylisPro posting one on Facebook that Arrow Racing is making front cover where you can run a conventional distributor

I think that only works on the 5.7-6.1 non-vvt blocks.

Yeap…..NO distributor set up for the VVT type blocks...yet, I'm sure someone out there is working on it.


400+CFM PWR (performance werks Racing) he closed up shop a few years back, owed a ton of people money , he was over 400CFM with the Apaches heads back in 2014, 425CFM at 700, was his claim ,with a 2.20in intake valve, I have a set here that PWR did ,on my bench they read 420. @.700 . I just finished up a set with cut down W5(height) 2.22 intake valves.

How many heads out there go over 400 cfm with a 2.14 valve?