Posted By: GRAYBO
using my old clutch pedals in 70 cuda.....I think - 01/10/19 03:11 AM
My brother is looking for some help. He wants to use his old clutch and brake pedals and make them work on a gen 3 with a manual gen 3 tranny. Anyone trying this....Oh its in a 1970 Challenger. Any help I can pass along? thanks
Posted By: Jerry
Re: using my old clutch pedals in 70 cuda.....I think - 01/10/19 03:43 AM
use the old clutch pedals and get a hydraulic throwout bearing setup. problem solved
Posted By: GRAYBO
Re: using my old clutch pedals in 70 cuda.....I think - 01/10/19 05:10 AM
use the old clutch pedals and get a hydraulic throwout bearing setup. problem solved
OKAY???? That seems a little over simplified...but I'll relay the message. Thanks.
Posted By: Jerry
Re: using my old clutch pedals in 70 cuda.....I think - 01/10/19 05:22 PM
you will have a hard time getting the gen 3 trans to fit. its pretty wide, but there are tremec conversions, and an a833 will fit as well. and few different places sell hydraulic throwout bearings these days. or you could even cobble your own together.