5.7 Identification

I just picked up a New Crate 5.7 Hemi. I ran the full part# to try and find out its application (s) But no luck on the (whole#) It is P53022755JA without the P & JA it has shown Dodge Ram. There is also another # TNXE6044810415. Can anyone tell me more on the application of this 5.7? Thanks

based on the coils it is 06+

based on the timing cover 08-

bout the only other thing is weather or not its mds, are there plugs or solenoids in the holes in the valley?

Got a picture of the entire engine? Truck vs car has a different intake and timing cover.

I see the dip stick on the left, my 06 magnum is on the right... so I'd guess truck, not sure were jeeps are located.

09-up truck 5.7

Look at the base of the block just above the oil pan, flat milled section.
should start with a number then 2 letters then 5.7.
1st # = year
1st letter= month
2nd letter=day followed by 5.7

This is what i got from my research and it's accurate for the 2003 to 2008.
Matt

Thank you all, was told it was an 07-09, and I do believe a truck, 395 HP version. Yelladustr, are you sure. I just couldn't find it for certain and when I sell it I need to know as much as I can? Again, The JA at the end of the part# would not show up in any search. Here is another pic. thank you all.

Truck
09+

Thanks again.