Oil in the throttlebody

Hi guys
08 ram 5.7 I had replaced the tb last year i had carbon built up on it that have me concern.. I done a plug change on her and i pulled the pleumn off to see if i have the same issue .. well i had a oily built up on the blade again! Do i need to replace the intake gasket or is this normal for the hemi?

thanks guys for any help!

the intake gasket only seals air except where the oil fil goes, I think you got a PCV problem.

i did't think about that! thank for head up on that!

The pcv valve on his truck is werid it has a oring on it i guess this what fails? couldnt i just change the oring?

do a online check of oil catch can for dodge hemis . i think this well help you .

oil catch can?

what i seen and read was for 2009 and newer hemi will that work on a 08 hemi ram?

I would say yes as you seem to be having the same trouble as the newer hemis i have one on my 2014 6.1. it works . best of luck

I put a Billet Technologies PCV "Catch Can" on my 6.1 Hemi. So far I've collected 80 Ml of oil (1/3 cup) in 4000 miles. This is 80 ml of oil that did not get into my intake and deposit on my intake valves.
Jim

That is a good idea. I think i will do the same. I have an 07 5.7 with 118k and i just cleaned the throttle body and it was pretty oily/gunky in there. Id hate to see the backside of my valves