Posted By: FC7AARcuda
1970 Limelight 'cuda Project - 02/09/24 04:25 PM
Saw this on Craigslist. Looks like it would have been a nice solid original paint driver if someone didn't go crazy with the rattle can paint.
Link
Posted By: oldjonny
Re: 1970 Limelight 'cuda Project - 02/09/24 04:59 PM
What is up with the driver's door? Re-skinned?
Posted By: Fat_Mike
Re: 1970 Limelight 'cuda Project - 02/09/24 05:05 PM
I think that's just the chrome edge protector.
Posted By: WINGNUT
Re: 1970 Limelight 'cuda Project - 02/09/24 05:08 PM
Are you referring to the J.C. Witney door edge guards? Look at the passenger door pic, looks the same. WINGNUT
Posted By: topside
Re: 1970 Limelight 'cuda Project - 02/09/24 06:16 PM
Doors & trunk lid show corrosion at the seams.
But the money shot is the fender aprons.
Ii looks like some extensive rust repair is needed, but could be a decent project.
No fender tag or Broadcast Sheet ain't great, but at least there's a Title (glass half full, right ?)
Posted By: fc7_plumcrazy
Re: 1970 Limelight 'cuda Project - 02/11/24 09:54 PM
missing tag or sheet kills it for me
Carsten
Posted By: 6PACKB
Re: 1970 Limelight 'cuda Project - 02/13/24 07:47 PM
missing tag or sheet kills it for me
Carsten
Perfect candidate for a personalized build IMO. Open slate for your favorite color & add on options while still a legit performance model rather than a Clone/Tribute...
Posted By: rdrnr6970
Re: 1970 Limelight 'cuda Project - 02/13/24 08:55 PM
It's rough yet cool and it runs
Posted By: gtx6970
Re: 1970 Limelight 'cuda Project - 02/13/24 09:20 PM
A candidate to just clean it up and drive it . Odds are at the buy in. and post resto coats you will be well under water