Posted By: BlwnCrcab
15x 8 rims - 12/14/23 11:13 PM
what are part number 3821550
I am thinking mid 80s truck 5 on 4 1/2
wiw 4 with nice caps
Posted By: topside
Re: 15x 8 rims - 12/15/23 11:12 PM
You mean what are commonly called "Ramcharger wheels" ?
I don't know the part #, but 15x8, 4.5 BS, 5 on 4.5 sounds like them.
I've bought several over the last 40 years, and they've always been around $80-$100 each in decent but not mint condition - basically needing blasting & painting, but straight & usable.
The aftermarket, I think, kept the used prices pretty steady; but now they're probably 50% higher.
I've bought new aftermarket steel wheels (Magnums) that I had to return for runout and/or crookedly-welded centers.
Hubcaps - if they're the later generic type - are priced all over the place; look at Ebay prices.
Stainless caps are better than the later aluminum.
Posted By: 340SIX
Re: 15x 8 rims - 12/16/23 04:20 AM
You mean what are commonly called "Ramcharger wheels" ?
I don't know the part #, but 15x8, 4.5 BS, 5 on 4.5 sounds like them.
I've bought several over the last 40 years, and they've always been around $80-$100 each in decent but not mint condition - basically needing blasting & painting, but straight & usable.
The aftermarket, I think, kept the used prices pretty steady; but now they're probably 50% higher.
I've bought new aftermarket steel wheels (Magnums) that I had to return for runout and/or crookedly-welded centers.
Hubcaps - if they're the later generic type - are priced all over the place; look at Ebay prices.
Stainless caps are better than the later aluminum.
My 15x8 with cap nubs are from 1978-1979 Ram Charger 15x8 4.25 back space
Posted By: 340SIX
Re: 15x 8 rims - 12/16/23 04:22 AM
https://board.moparts.org/ubbthread...-so-figured-i-would-too.html#Post2808668Make sure you.measured them right. A lot of M Bodies etc had 15x7 i pulled tins of them. The 15x8 were not made past 79 I don't think and lots of guys think 7s are 8s