Any Sheet Metal Available for 61 Seneca?

Have a line on a decent bodied 2 door Seneca but it needs floors and trunk pan. Is it possible to find any of this sheet metal aftermarket or would I have to piece something together myself?


Thanks.
Brian

I think one guy is making them.My kids 62 300 needed frt floor and trunk.He took it to a local guy that did them for 500 bucks.Looks as good as new.Plus he used heavier metal.Not 100 percent accurate but a nice job.rocky

This place lists floor & trunk pans:
http://c2cfabrication.com/store/index.php?manufacturers_id=27&sort=3a&page=5

I think thats the guy I talked to about some panels.There was a 61 Senaca in a local junk yard.I dont know if its still there.My kid was going to snag the manual steering box and collum from it.Rocky

Here is a pic of my '61 Seneca 4 door sedan with a '61 Chrysler Newport front clip and bumper some years back. Just started to restore it back to original again.

Einar in Norway.