Posted By: bigdad
1955 Plymouth Gasser project - 08/10/09 01:33 AM
At this point still just a thought, this is a couple photoshops of the basic idea
1955 Plymouth Gasser project
Posted By: RV2
Re: 1955 Plymouth Gasser project - 08/10/09 01:48 AM
I love it!
Posted By: B1arno
Re: 1955 Plymouth Gasser project - 08/10/09 02:50 AM
Very cool! 
Posted By: RodStRace
Re: 1955 Plymouth Gasser project - 08/10/09 03:07 AM
Lookin' good!
Couple of minor tweaks, just to get your head spinning;
The front fender spear should be shortened to align with the back of the wheelwell angle, which is similar to the other chrome angle.
Fudge the rear axle forward a bit, so it looks a bit funny in the wheelwell.
Front bumper off? I like how they complete the front, and it's smart on a street driver, but it was all about speed, and a lot of gassers took those off.
Couple of minor tweaks, just to get your head spinning;
The front fender spear should be shortened to align with the back of the wheelwell angle, which is similar to the other chrome angle.
Fudge the rear axle forward a bit, so it looks a bit funny in the wheelwell.
Front bumper off? I like how they complete the front, and it's smart on a street driver, but it was all about speed, and a lot of gassers took those off.
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/10/09 03:10 AM
Just a rough idea, here is is without the wheel opening cut out
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/10/09 03:14 AM
The front bumper most likely would go away
The grill lends itself nicely to stick a moon tank in it
I think the two side pieces just un bolt on them
If not
The grill lends itself nicely to stick a moon tank in it
I think the two side pieces just un bolt on them
If not
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/10/09 03:16 AM
And, at this point I dont have a 55 Plymouth to build !!!
So, maybe it will never happen
Want a 55 Hardtop or 61 hardtop -Plymouth
Nothing else works for me
So, maybe it will never happen
Want a 55 Hardtop or 61 hardtop -Plymouth
Nothing else works for me
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/10/09 03:31 AM
hmmmm ..
well, how about a 56 Dodge sedan
well, how about a 56 Dodge sedan
Posted By: bohmer2
Re: 1955 Plymouth Gasser project - 08/10/09 03:31 AM
With the gasser look I always think it looks better to have the cut wheel well then trying to tuck. The chrome would be an issue for me as it looks better with out it cut so do you raise it or remove it completely?
Posted By: dOoC
Re: 1955 Plymouth Gasser project - 08/10/09 06:03 AM
NOT a whole lot of diff between a 55 and 56 Plymouth ....IMO.
My first so-called HP car was a 56 Belvedere with a 392 Hemi.
My first so-called HP car was a 56 Belvedere with a 392 Hemi.
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/10/09 12:57 PM
And with wheel openings cut ..
I prefer the shorter fins on the 55 and the hardtop too me looks nicer
I prefer the shorter fins on the 55 and the hardtop too me looks nicer
Posted By: rabid scott
Re: 1955 Plymouth Gasser project - 08/10/09 07:25 PM
That car would look cool exactly like that, minus the nosebleed height front end. It just looks silly to me. 
Now, if the front end was low, with the cut out wheelwells and ladder bars it would look tough.
Just my humble opinion.
Now, if the front end was low, with the cut out wheelwells and ladder bars it would look tough.
Just my humble opinion.
Posted By: bohmer2
Re: 1955 Plymouth Gasser project - 08/11/09 09:33 PM
Not sure how far Springfield, MO is from you but there is a 56 Plymouth on there cheap. Its a Sedan not a hardtop though. 56 Link
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/12/09 06:19 PM
Quote:
Not sure how far Springfield, MO is from you but there is a 56 Plymouth on there cheap. Its a Sedan not a hardtop though. 56 Link
As my dog would say
Ruff, Ruff
http://www.goheartland.com/VintageVehicles/cars/55PlymouthSedan.html
Posted By: RUNCHARGER
Re: 1955 Plymouth Gasser project - 08/14/09 12:47 AM
Awesome! I vote for a hardtop, no front bumper, rear wheel cutouts. Both my brothers had 55-56 Plymouth 2 DR HT's in the sixties as their first cars. I guess maybe I need one now.
Sheldon
Sheldon
Posted By: dynamite
Re: 1955 Plymouth Gasser project - 08/14/09 01:24 AM
Here's mine,, not a gasser ,but it goes 12.60's now,and I drive it daily. Edit ...Just came back from NJ and ran 12.508 @107 at Englishtown..
Posted By: RodStRace
Re: 1955 Plymouth Gasser project - 08/14/09 02:42 PM
I like that one!
Posted By: dynamite
Re: 1955 Plymouth Gasser project - 08/14/09 04:34 PM
Thanks RodStRace ,,heres some specs on my 56 Ply,,440 cid ,bullit hyd roller cam,KB 10.5 pistons,906 heads with minor pocket porting,Eddy rpm intake with 750 Proform carb, t-flight, 8 3/4 rear with 3:91 posi,Extras are Volare type k frame with disc brakes and P/S , tilt steering wheel,power windows and A/C.... I do love those gassers tho
Posted By: poorboy
Re: 1955 Plymouth Gasser project - 08/15/09 04:58 AM
That's nice, I like it. Gene
Posted By: 19swinger70
Re: 1955 Plymouth Gasser project - 08/15/09 07:42 PM
Here's a couple of pics of a new project I hauled home last week. 
Posted By: 19swinger70
Re: 1955 Plymouth Gasser project - 08/15/09 07:43 PM
other side
Before someone comments about the little strap across the fenders and hood:
the front end was only bolted on loosely w/ a couple bolts and no hood latch. the strap was just snug enough to keep the fenders and hood from flopping around.
Before someone comments about the little strap across the fenders and hood:
the front end was only bolted on loosely w/ a couple bolts and no hood latch. the strap was just snug enough to keep the fenders and hood from flopping around.
Posted By: dynamite
Re: 1955 Plymouth Gasser project - 08/15/09 08:46 PM
55's are cool ...put a big block in it, paint it White and gold and I'll see you at next years Hot Rod Power Tour..OOPS sorry Big Dad ,,didn't want to hijack your thread..OK Make it gasser instead
Posted By: 19swinger70
Re: 1955 Plymouth Gasser project - 08/15/09 08:49 PM
Anyone make patch panels for the 55 and 56's? If not - are the 55 chev panels anywhere close to massage and make work? my rockers needs replaced, and maybe one door skin.
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/15/09 08:52 PM
They do make rockers, not sure about anything else
Posted By: 19swinger70
Re: 1955 Plymouth Gasser project - 08/15/09 09:01 PM
just- found inner and outer rockers on Rockauto website. in the 25-30$ range. they also list floor pans
Posted By: rrunner
Re: 1955 Plymouth Gasser project - 08/17/09 01:04 AM
Quote:Would love to see more of your car, mostly the BB install and all the mods to make it all work. Here's my project. I'm gonna go BB or a 408 sb, either way it's gotta run!
55's are cool ...put a big block in it, paint it White and gold and I'll see you at next years Hot Rod Power Tour..OOPS sorry Big Dad ,,didn't want to hijack your thread..OK Make it gasser instead
Posted By: dynamite
Re: 1955 Plymouth Gasser project - 08/17/09 04:25 PM
Thanks I'll pm you with more pics
Posted By: Moparsky
Re: 1955 Plymouth Gasser project - 08/17/09 06:51 PM
Beautiful cars guys, love them !
Posted By: Anonymous
Re: 1955 Plymouth Gasser project - 08/18/09 03:46 AM
I believe I just bought the car you are using in your picture.
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/18/09 03:50 AM
Cool !
whatcha going to do with it ?
whatcha going to do with it ?
Posted By: Anonymous
Re: 1955 Plymouth Gasser project - 08/18/09 03:53 AM
Restore it. First to stock then mild custom.
Posted By: Anonymous
Re: 1955 Plymouth Gasser project - 08/18/09 03:55 AM
It will be a while though.
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 08/18/09 03:57 AM
Good deal, hope you stay in touch and keep posting pics of the progress !!
Posted By: stage3
Re: 1955 Plymouth Gasser project - 08/23/09 11:09 PM
Love both of those cars. how about PHOTOSHOPPING both and lowering them with some 18 or 20 inch wheels.
Posted By: bohmer2
Re: 1955 Plymouth Gasser project - 09/22/09 09:25 PM
Quote:
hmmmm ..
well, how about a 56 Dodge sedan
Just say this today and remember this Thread.
see the link
56 Dodge Sedan
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 09/22/09 09:57 PM
I'd prefer a 55 (I know, picky, picky) but, the smaller fins to me look better and its a Plymouth which I prefer more too
But, the good news ..I DID FIND MY VALIANT WAGON !
But, the good news ..I DID FIND MY VALIANT WAGON !
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 09/22/09 10:10 PM
I called him for pics, when he sends them I'll post ..sounds like hood is junk and glass is broke out of the car ..
Thanks, never know might work
Thanks, never know might work
Posted By: bohmer2
Re: 1955 Plymouth Gasser project - 09/23/09 01:14 PM
Quote:
I called him for pics, when he sends them I'll post ..sounds like hood is junk and glass is broke out of the car ..
Thanks, never know might work
Keep us up to date. Whats the plan for the wagon?
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 09/23/09 01:56 PM
https://board.moparts.org/ubbthreads/show...e=0#Post5493923
Not 100% sure which way I'll go with it but, here are a couple ideas
Trying to get a good idea before I proceed
Not 100% sure which way I'll go with it but, here are a couple ideas
Trying to get a good idea before I proceed
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 05/18/14 11:17 PM
Posted By: dynamite
Re: 1955 Plymouth Gasser project - 05/19/14 12:11 AM
Just for the heck of it... it's now at 11.72 @ 114..with stock iron 906 heads .. just got new Marsh heads ..lookin for 11.49 next week
.jpg "8148433-Dad_Car(1).jpg")
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 05/06/15 07:45 PM
btt
Posted By: moparpollack
Re: 1955 Plymouth Gasser project - 05/07/15 01:41 AM
There's one local to me here. My buddy priced it at $1600 common sense kicked in when I looked at the seven other cars I have. 
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 05/07/15 02:48 AM
55 hardtop ?
Posted By: moparpollack
Re: 1955 Plymouth Gasser project - 05/07/15 04:18 AM
Originally Posted By bigdad
55 hardtop ?
Yes hardtop blue with black insert.
Posted By: bigdad
Re: 1955 Plymouth Gasser project - 05/07/15 01:50 PM
Originally Posted By moparpollack
Originally Posted By bigdad
55 hardtop ?
Yes hardtop blue with black insert.
Is it really rusty ?
Posted By: moparpollack
Re: 1955 Plymouth Gasser project - 05/10/15 10:11 PM
Been sitting a long time probably has floor pan rust.