Moparts

Aftermarket Steering Column

Posted By: B1arno

Aftermarket Steering Column - 11/24/08 02:47 AM

Hi All,
I am thinking of buying an aftermarket column for my 34 coupe project and was wondering if anyone has experience with either Flaming River or IDIDIT columns? Any advice is greatly appreciated.
Arno

Attached picture 4834758-34HemiPlymouth.jpg
Posted By: Mopar Ron

Re: Aftermarket Steering Column - 11/24/08 03:43 AM

both are good products, but I have never used a new one, only junkyard columns in all my builds Ron...
Posted By: Flipper1938

Re: Aftermarket Steering Column - 11/24/08 02:56 PM

These guys also make some pretty stuff.

http://www.limeworkspeedshop.com/store_columnsandwheels_hotrodcolumns.html
Posted By: B1arno

Re: Aftermarket Steering Column - 11/24/08 03:24 PM

Quote:

both are good products, but I have never used a new one, only junkyard columns in all my builds Ron...



Ok, Ron brings up another question. Are there certain junkyard columns that work better in streetrods than others? Favorites?
Arno
Posted By: Mopar Ron

Re: Aftermarket Steering Column - 11/24/08 09:11 PM

Quote:

Quote:

both are good products, but I have never used a new one, only junkyard columns in all my builds Ron...



Ok, Ron brings up another question. Are there certain junkyard columns that work better in streetrods than others? Favorites?
Arno




on cars that I need a shifter on the column I use a Cordoba column thay have a shifter and indicator

and some trucks or vans have tilts with no shifter on them. of I have used a column with a shifter and just cut off and filled the shifter hole to make a smoother looking one Ron...
Posted By: 36PLYM

Re: Aftermarket Steering Column - 11/24/08 10:08 PM

Used Ididit on the 36 Plymouth, works great, installs easy.
Posted By: 33Plymouth

Re: Aftermarket Steering Column - 11/25/08 12:23 AM

I used a brushed stainless steel "Flaming River", with tilt easy installation and looks great
Posted By: Zapp

Re: Aftermarket Steering Column - 08/03/09 01:42 PM

Definately check out Lime Works, some nice gear and great guys
© 2024 Moparts Forums