Posted By: moparacer
PAGING RYAN J - 09/11/11 03:25 AM
Ryan need to get a hold of you tomorrow if its OK. Sent you a PM.
Have an engine emergency....
Have an engine emergency....
PAGING RYAN J
Posted By: pittsburghracer
Re: PAGING RYAN J - 09/11/11 03:53 AM
Rumor has it Ryan has been busy in hope of getting his car to the track in the near future. 
Posted By: W7 Duster
Re: PAGING RYAN J - 09/11/11 12:38 PM
Don't think he goes on this as much. You need to find someone with his cell# and contact him that way. 
Posted By: 69Cuda340S
Re: PAGING RYAN J - 09/11/11 11:16 PM
He usually responds to PMs.
Posted By: Hot 340
Re: PAGING RYAN J - 09/11/11 11:41 PM
Quote:He told me dont bother to PM him here anymore. Go to his site, it has his email and phone number.
He usually responds to PMs.
Posted By: moparacer
Re: PAGING RYAN J - 09/12/11 12:04 AM
Yep I remember him saying he wasnt on here much anymore.
Have to call him tomorrow AM.
Have to call him tomorrow AM.
Posted By: J_BODY
Re: PAGING RYAN J - 09/12/11 01:49 AM
Quote:
He usually responds to PMs.
Nope.... tried that last week. Called and left a message, and a few days later got ahold of him. We've had a problem child W5 head that was CNC ported and leaked, and then repaired, and then the failed again. No fault of his.... of all the CNC ported heads he's done, we must have gotten one of "those" castings. Called him a few days later and got ahold of him right away.... had to quiz him on what he knew about the set of W5's we were buying. Now that we have four of them, maybe we'll end up with one good pair!
...btw I'm so very glad that I've had the opportunity to find people like Ryan and Dwayne Porter via this board.
Posted By: fishy340
Re: PAGING RYAN J - 09/12/11 02:52 AM
he's a got a girlfriend now,and is real busy..he replys to all emails,just takes a few days!
Posted By: moparacer
Re: PAGING RYAN J - 09/12/11 05:04 AM
Quote:
he's a got a girlfriend now,and is real busy..he replys to all emails,just takes a few days!
Don't have a few days. Have to get this thing back together and make some passes on Sunday at the latest.
Leaving for the Division 1 bracket finals Wednesday of next week.
Posted By: RyanJ
Re: PAGING RYAN J - 09/13/11 08:15 PM
Just got on here to look @ the post about gearjammerdart's car burning
Have not been on in a month or 2... lot's of work @ the shop, girlfriend & daughter take up alot of my free time & yes we are getting my SuperBee finished up & made some test shots with it last weekend & am making changes this week to get some boost off the line & will start turning boost up now that I know car goes straight & stops etc.
Car ended up weighing 3724 with me in it & half cell of fuel... went 142 MPH last week @ 8 PSI. 0 boost off the line, drove like a Cadillac thanks to BGR & John Simbeck for the excellent chassis work. Will slowly turn the boost up from here... will probably try 10-12 PSI this weekend.
Yes if anyone needs to get ahold of me, email & just calling the shop are the best 2 methods, with the shop phone being the quickest...
We got moparacers motor in Monday afternoon & are planning on having it ready for pickup Friday afternoon for him to make the bracket finals. Doug Herbert roller wheel gave up the ghost after 250 passes. 300 seat/650 open, fairly decent life for a $290 set of lifters.
Have not been on in a month or 2... lot's of work @ the shop, girlfriend & daughter take up alot of my free time & yes we are getting my SuperBee finished up & made some test shots with it last weekend & am making changes this week to get some boost off the line & will start turning boost up now that I know car goes straight & stops etc.
Car ended up weighing 3724 with me in it & half cell of fuel... went 142 MPH last week @ 8 PSI. 0 boost off the line, drove like a Cadillac thanks to BGR & John Simbeck for the excellent chassis work. Will slowly turn the boost up from here... will probably try 10-12 PSI this weekend.
Yes if anyone needs to get ahold of me, email & just calling the shop are the best 2 methods, with the shop phone being the quickest...
We got moparacers motor in Monday afternoon & are planning on having it ready for pickup Friday afternoon for him to make the bracket finals. Doug Herbert roller wheel gave up the ghost after 250 passes. 300 seat/650 open, fairly decent life for a $290 set of lifters.