my hemi.

i agree. if i can put 2 sideways holleys on it, i think i will go that route.

engine is a 426. or maybe a little smaller. not sure. engine had a novi with 6.1 heads. those in the pic are eagles with smaller chamber. no cam picked out yet. i want to run the numbers on the current cam first and see what it has

im under $4k for everythng you see in the pic. it would be cool to get 650hp for that kind of money

I want to see it with the motor plate bolted on.

looks great!

Very nice

Looks killer! Is that a modified Mod Manifold from Indy?

who's valve covers?

Care to share the specs on this build? These new hemi engines have really caught my eye. If I ever build another engine it's going to be a gen3 hemi

Looks good Sixpack

I like the valve covers... what headers do you have on it?

IIRC I think their 2" TTI's.

Looks pretty good,Ray!! When is it going in?

Thanks Guys, goin to drag week next week so i wont be getting much done till next month. still working ittle gremlins out of the cuda

the intake is a modded 392 hot heads research intake. not that i know anything but i like it better than the mod man because it has a "V" floor and long sweeping runners. (credit to twaters on intake mods)

the valve covers are made by Indy. there are special sparkplug wires but i just cant pay what they want so i bought 426 hemi wires cheap on ebay and going to make my own.

the headers are beautiful. TTI 6.4 hemi. the exhaust port in the header flange is big and round and i have also been told spending alot of time porting the exhaust side of the head makes a big difference in HP

NHRA Mark and his partner Bob have a program to cnc a 5.7 timming cover and have at least a B/E body motor plate. i'm in the middle of polishing the cover and need to scotch bright the plate befor i post a pick

looks good Ray

My buddy who owns The CrankShop is the original designer of those valve covers. He may be able to help you with a less expensive wire set.

Lookin good Ray!