Posted By: QWK_ENUF
1 7/8 HEADERS IN BB DUSTER - 08/02/11 09:03 PM
looking for some coated 1 7/8 headers that fit a b motor in an a body in chassis, anybody make them...
thanks
thanks
1 7/8 HEADERS IN BB DUSTER
Posted By: deaks
Re: 1 7/8 HEADERS IN BB DUSTER - 08/02/11 09:54 PM
TTI ?
Posted By: MR_P_BODY
Re: 1 7/8 HEADERS IN BB DUSTER - 08/02/11 10:05 PM
I prefer to buy (if I'm buying them) and check to
make sure they fit and correct them if needed then I
take them to QC Coatings(happens to be local to me)
and have them plated... that way I know they will fit
which seems to be somewhat of a problem on headers
(plus if needed add length to the collector for peak
torque... most are too short)
make sure they fit and correct them if needed then I
take them to QC Coatings(happens to be local to me)
and have them plated... that way I know they will fit
which seems to be somewhat of a problem on headers
(plus if needed add length to the collector for peak
torque... most are too short)