Picked up my new bullet yesterday- UPDATE Video added

After two month of chasing parts (Mostly due to my frugal ways) I have them all in one place and the 408 will be completely assembled, in the car and running this weekend! Plan on doing a break in run on the engine, then to track on Tuesday. Specs: 408, 264/268@50 solid roller, 1.6 roller rockers, 11 to1 comp. Holly 750 Dominator, 1 5/8 headers. ( I have 1 7/8 headmans to be installed soon.) 10 X 29 Hoosiers and 3.91 gears with a TF 904. 2850 race wt. Looks like the weather will be in the high 80's. Any guesses as to what it will run?

10.70 or 10.80s still have stock heads.

oop's, forgot, Edlebrocks stage 2 ported by SSDS

good luck i'm a little weary bout the 3.91's w a 29" tall tire,,but i see 10's easy n e ways.

hey wasn't ur car a bb before? i saw it at atco

Nope, Always a small block. Just going from mild to wild!

best of luck should hall,the eddy heads make good power

My 408 is somewhat similar except for heads and headers and runs from 10.teens to 10.30s so I'm going to guess yours will run 10.40-10.50 range

Who did the machining?

The short block was built by Ryan at Shady Dell, We assembled the rest.
We'll have it together ready to race tomorrow and no place to run a T&T until Tuesday.

Cool - let us know how you make out -
you can always call Kevin @ Atco and see if there is a rental you can jump in on...

Quote:

---

The short block was built by Ryan at Shady Dell, We assembled the rest.
We'll have it together ready to race tomorrow and no place to run a T&T until Tuesday.

---

Looks nice and should run hard.............one thing though, if it was me, I`d get rid of that sharp kink in your alum. line feeding in to the reg. and put a good 90 at the reg. then straight line to it or make it EXTRA swoopy if u know what I mean.