Headers for a 1968 Dart with 440-1 Heads

Cant Gary make you a set? Just asking

A friend of mine put 2" tti's on a 500 RB and he had to notch the shock support on the passenger side.
Mick

stahlheaders.com the best you can get....not cheep,but last forever!

I bought a set of Hedman race headers (no flanges for the collectors to bolt to) for my car(1971 Duster with a BB) when I bought the Indy heads, call Hedmans race shop # in Georgia to get the part number Sorry for not having it, Google Hedman Headers, the race shop number is in the contact information The Hedmans fit a lot better than the Hookers I had did, the Hookers rub the front tires more, the Hedmans are tuck in tighter to the inside of the fenderwells IHTHs BTW, Hedman makes two different sets of headers for the BB A body Mopars, one for standard heads and one for the Indy heads I bought mine form Summit, have them drop ship them to you directly, Summit does not stock them, they are custom made by Hedman when you order them Hedman will coat them also, way cheaper than anyone else I could find Nice coating, I used black, hard to see them in the car from the sides this picture is of my car before switching to the Hedmans, the Hookers are Jet Hot coated and the exhaust pipes(under the car rocker panels all the way back and go under the rear end hosuing are coated black The side pipes hide the ladder bars also the Hedmans are really nicely finished and fit well

There is an abundance of capable fab shops in the Detroit-Metro area that can build you a set. The last set I did, I had about $600. in materials. Plus labor. Plus powder coating. You have to realise that when you put a motor in using a motor plate etc. your gonna create variation in how well these shelf headers work.

Custom headers are the ONLY way to go. Mine are 2" to 2 1/8" stepped fenderwell headers that my friend made for me from Hooker flanges and tubing that I bought from Jegs.

Here's why they are worth every penny:

I can remove them from the car in less than 1/2 hr.

I can replace the starter in about 10 minutes. (nothing is in the way)

There is not a single ding, dent, or sharp bend on them.

When I put the car on the rear bumper in Chicago (wheelie bars were in the trailer ) I dinged the oil pan and tranny pan, but did not touch the headers.

I can load/unload my car on any open or enclosed trailer and the headers will not drag or hang the car up.

Thanks everyone for the info and I will look into custom to Hooker to Headman.Does anyone have a name of a shop that can build a set when the motor is in and finished?

Look at sixpakgut post on headers, I added two pictures to it instead of this one My bad Side picture with Hedmans.

Engine pictture of Hedmans for Indy heads using SR instead of the 440-1 heads with a low deck block

In most applications the The 2" Hooker and Hedman fenderwell headers work.They range from $500 to $750.Custom headers run from $800 to $1000 for larger tube and coated.

Does anyone know of a good Place in Michigan to get custom headers done?

Diamond Fabrication on Groesbeck, North of ten mile on the east side

Thanks Mark