trans recommendations

Here is the setup 68 dart street strip 440 with cast iron manifolds 62-65 reversed forward. Single bw s480 turbo with 4 inch down pipe fast fuel inject setup on a proflow
Xt manifold with a 90mil throttle body. The rear is d-60 with 373 gear with spool the motor will have edelbrocks out of the box comp will be between 8.5 9.0. The cam will be custom at a 113-114 lobe around 500-540 lift this setup should make 7-800 hp
At 10-12 psi. What are some of you guys doing for your tranny?

Quote:

---

Here is the setup 68 dart street strip 440 with cast iron manifolds 62-65 reversed forward. Single bw s480 turbo with 4 inch down pipe fast fuel inject setup on a proflow
Xt manifold with a 90mil throttle body. The rear is d-60 with 373 gear with spool the motor will have edelbrocks out of the box comp will be between 8.5 9.0. The cam will be custom at a 113-114 lobe around 500-540 lift this setup should make 7-800 hp
At 10-12 psi. What are some of you guys doing for your tranny?

---

I am running a 833 4 speed. I am sure that third gear will not be able to hold that kind of horsepower.