looking to buy a starter

Posted By: boatracer572

looking to buy a starter - 04/28/11 04:22 AM

Im looking to replace my old Dakota starter. What have you guys have had the best luck with? motors 16to1.
Thanks

Posted By: Al_Alguire

Re: looking to buy a starter - 04/28/11 05:01 AM

I have a powermaster and no issues at all. To be honest I had a regualr Dodge typ emini in the car for years. Still be there is I had not let it roll off the toolbox and break the dang thing. I had this powermaster sitting around and we threw it in. Been trouble free with it.

Posted By: HEMIFRED

Re: looking to buy a starter - 04/28/11 05:18 AM

I have used both the regular and heavy duty factory starters without any problems on motors 572 & 604 with 15-1 compression.

Posted By: WICKD6PK

Re: looking to buy a starter - 04/28/11 12:23 PM

I have a robbmc starter id sell if your interested

Posted By: 68roadrunner

Re: looking to buy a starter - 04/28/11 12:52 PM

powermaster here only had to tighten the screws in it once, i needed the clockable one to get it off the frame.no problems.

Posted By: CHAPPER

Re: looking to buy a starter - 04/28/11 12:54 PM

Anything but a Powermaster with the indexable motor...

Posted By: Commando1

Re: looking to buy a starter - 04/28/11 02:05 PM

Quote:

Anything but a Powermaster with the indexable motor...

Why? Just asking....

Posted By: boatracer572

Re: looking to buy a starter - 04/28/11 03:32 PM

Thanks for the replys,anybody have any experience with the msd or the maziere starters?

Posted By: POS Dakota

Re: looking to buy a starter - 04/28/11 03:57 PM

MSD needs to stick to ignitions...I dont know about meziere.

A 100 dollar starter from tuff stuff at summit will work just fine.

Posted By: speedy383

Re: looking to buy a starter - 04/28/11 04:08 PM

I have a powermaster and a backup mopar mini ,they both have done the job flawlessly.When i neeed another i will go with the Robb Mac.Very well dasigned,more gear reduction ,a better fit and can be indexed.

Posted By: dragram440

Re: looking to buy a starter - 04/28/11 05:07 PM

Stock mopar mini in mine with over 200,000 miles on it and turns 12.5 to 1 500 no prob.

Posted By: 540challenger

Re: looking to buy a starter - 04/28/11 05:55 PM

Quote:

Quote:

Anything but a Powermaster with the indexable motor...

Why? Just asking....

If it was anything like the one i brought they don't machine the nose correctly. For the price i rather go with a robbmc starter but i was in a pinch and needded a starter i ended up putting a stock unit to hold me over.

Posted By: galen

Re: looking to buy a starter - 04/28/11 06:16 PM

Quote:

Thanks for the replys,anybody have any experience with the msd or the maziere starters?

I have an msd on the belvedere works fine, 3000 miles a lot of hot starts and no heat shield. Have an msd on the boat with over 15 to 1 spins it fine, but have not started it yet. Tried the clockable powermaster it did not want to spin it very good. I may have just got a bad one as with anything. I wanted to use a Robb MC but they said it will not work with my 130 tooth flywheels.