Single vs Twin Plumbing

Hey Guys,
I have a '67 B-body. Was just curious if it is easier to plumb two small turbos or one turbo? It looks like you use one turbo for each bank on a twin turbo setup. And all eight cylinders into one on a single turbo set up.
Michael

Depends of how you do it. If you can build one, you can build both.

There's a thread somewhere in this section with pics of a 67 Belv or GTX, green in color.

I agree with Jyrki, if you can build one then you can build either. I put twins on my '67 Charger because it worked out better for my build. I wanted to keep the factory accessory drives for instance. Either is doable. Good luck!!

I would say the twins plumbing is a bit easier than a single...

You mean this one?http://i355.photobucket.com/albums/r461/FriedDonuts/P1000670.jpg http://i355.photobucket.com/albums/r461/FriedDonuts/P1000672.jpg http://i355.photobucket.com/albums/r461/FriedDonuts/P1000654-1.jpg

YESS!

I have a '67 Coronet. Thats my kind of look as well.

Michael