Lost my cam card, Indy CM3

As the title of the post suggests, I've misplaced, thrown out or lost the info. Cam is an Indy CM3, I can remember most stuff but not the recommended lash settings Anyone using the same cam who can share the info?
I can only blame old age
TIA
Tig

Don't know about that cam Tig maybe call Indy?...........or break out dial indicator & measure lash ramp , multiplying this figure by rocker ratio will net lash settings.

Send Bob George a pm, Bobs an indy dealer.

my cam card for the cm-2 says, for 1.5 rockers intake lash .023, exhaust lash .023. i dont know if they are the same as the cm-3 thou..

Thanks for the help guys, cam card found in the obvious place

Now that you found it,
can you post a scan so people can save it and help the next guy?

Sure, but since I don't have a scanner I'll type it.

Cam data Duration @ .05 in
Intake and ex lash .023 .024 .025 in (I'm guessing this is for 1.5 1.6 and 1.7 arms)
Lobe seperation 112.5 cam deg.
Valve overlap 65.8 crank deg.

Intake
Valve opens 32.3 'BTDC
C/L 108.5 'ATDC
Duration 282 Crank deg
Valve closes 69.7 'ABDC
lobe lift .479 in
Valve lift (1.5) .719 in

Exhaust
Valve opens 85.3 'BBDC
C/L 116.5 'BTDC
Valve closes 33.5 'ATDC
Duration 298.8 crank deg
Lobe lift .450 in
Valve lift (1.5) .675 in

HTH's Sorry I didn't think to add this before

Quote:

---

Exhaust
Duration 298.8 crank deg

---

WOW, lots of duration at 0.050"