Moparts

dart cowl hood picts please

Posted By: Deepockets

dart cowl hood picts please - 03/07/11 01:18 PM

i know i need to increase my hood clearance on the 69 dart to run a air cleaner with the victor manifold. i have the aar six pac hood and it's nice.i just need more room. it looks like aar has one, but i kinda like the ridge in the middle. any recomadations of manufactures. i know to stay away from unliniter products. lets see the picts.
Posted By: 471b1dart

Re: dart cowl hood picts please - 03/07/11 03:35 PM

heres mine, pretty sure its a 6" cowl

Attached picture 6515803-n585009588_770734_2055.jpg
Posted By: Guitar Jones

Re: dart cowl hood picts please - 03/07/11 04:45 PM

I used a Jegs 2.5" bolt on job but then had to cut it anyway when the tunnel ram went on. Here's a pic before the saw got it and before paint.

Posted By: 3ddart

Re: dart cowl hood picts please - 03/08/11 05:17 AM

this is with the aar bolt-on hood

Attached picture 6517482-DSCF1206.JPG
Posted By: MR_P_BODY

Re: dart cowl hood picts please - 03/08/11 06:03 AM

I bought a AAR hood with a 4" cowl for my Rampage...
should be here tomorrow so I can pick it up from the
freight company... I did see it when I was in Florida,
he had to cut and add 2" to the normal 2" that they
offered... looked good
Posted By: bigtimeauto

Re: dart cowl hood picts please - 03/08/11 02:49 PM

AAR here
Posted By: Bigcube

Re: dart cowl hood picts please - 03/08/11 03:13 PM

6" glasstek lift off. I like the ridge, matches the ridge on the top of the fenders

The hood in my sig pic was a 5" bolt on. I had it up just a tad in the back to clear the corner of the cowl (in the middle) when the hood was opened.
Posted By: mshred

Re: dart cowl hood picts please - 03/08/11 08:59 PM

Does anybody sell a to the window cowl that can be trimmed back on an angle (or maybe already angled) so wipers can be functional still?
Posted By: Bigcube

Re: dart cowl hood picts please - 03/08/11 09:37 PM

The bolt on hood from Glasstek you should be able retain the wipers. I had to trim the back some so when it was opened it wouldn't hit the window.
Posted By: mshred

Re: dart cowl hood picts please - 03/08/11 10:37 PM

Quote:

The bolt on hood from Glasstek you should be able retain the wipers. I had to trim the back some so when it was opened it wouldn't hit the window.




sweet! thanks!
Posted By: Challenger

Re: dart cowl hood picts please - 03/08/11 11:35 PM

Quote:

heres mine, pretty sure its a 6" cowl



Hey 471b1dart, Who made your hood? THANKS!
Posted By: 4404dart

Re: dart cowl hood picts please - 03/09/11 03:37 AM

Unlimited products, yes it needed some work, but not too bad. 6 inch.
Posted By: mopar65

Re: dart cowl hood picts please - 03/09/11 05:00 AM

Quote:

Unlimited products, yes it needed some work, but not too bad. 6 inch.




dam thats a nice car. do you remember how much the hood set up cost you??thanks Mopar65
Posted By: 4404dart

Re: dart cowl hood picts please - 03/09/11 03:18 PM

It was under 400 when I bought it. I sold the car last Nov and heard it was for sale or sold again already.
Posted By: 471b1dart

Re: dart cowl hood picts please - 03/10/11 10:13 PM

Heres the other angles you wanted

Attached picture 6522829-59286_474095327773_585242773_6460134_7200111_n.jpg
Posted By: 471b1dart

Re: dart cowl hood picts please - 03/10/11 10:14 PM

another , not the greatest though

Attached picture 6522831-moosescar019.jpg
Posted By: Challenger

Re: dart cowl hood picts please - 03/10/11 11:07 PM

Quote:

Quote:

heres mine, pretty sure its a 6" cowl



Hey 471b1dart, Who made your hood? THANKS!

Posted By: 471b1dart

Re: dart cowl hood picts please - 03/11/11 02:42 AM

IM pretty sure its a glasstec or a hairy glass hood

Attached picture 6523331-180472_10150097056799589_585009588_5980132_3493652_n.jpg
Posted By: Spaceman Spiff

Re: dart cowl hood picts please - 03/11/11 02:57 AM

Quote:

6" glasstek lift off. I like the ridge, matches the ridge on the top of the fenders

The hood in my sig pic was a 5" bolt on. I had it up just a tad in the back to clear the corner of the cowl (in the middle) when the hood was opened.



I'm new on this board, so excuse me for asking, but is that Clinton Cranston's ( i think that's the spelling) old car?
Posted By: Bigcube

Re: dart cowl hood picts please - 03/11/11 03:33 AM

Quote:



I'm new on this board, so excuse me for asking, but is that Clinton Cranston's ( i think that's the spelling) old car?


No, I have had this car since 1988, it was a /6 column shift, bench seat, 13" wheel, one owner car from Virgina with 44k miles when I bought it. It has 49k on it now. The old lady would be rolling in her grave if she ever saw it now PSST, it's for sale
Posted By: SV_MOPARS

Re: dart cowl hood picts please - 03/11/11 04:29 AM

Quote:

Quote:

6" glasstek lift off. I like the ridge, matches the ridge on the top of the fenders

The hood in my sig pic was a 5" bolt on. I had it up just a tad in the back to clear the corner of the cowl (in the middle) when the hood was opened.



I'm new on this board, so excuse me for asking, but is that Clinton Cranston's ( i think that's the spelling) old car?



dam i love fat tired cars, awesome looking car , i can't wait for pro-street to be hip again, should be soon as history does repeat its self .
© 2024 Moparts Forums