will it go 9's

Been a long time coming.Eng is a 493 bb comp. 12.87to1 heads are max wedge ed victors from modern cyl head they flow 366 at 600 lift. Cam is comp 6.43 lift intake dur. 265 at.50 ext dur at.50is 270 intake maifold mopar 337 with alot of port work. rocker arms are t d 1.5 ratio 1050 e85 carb.abody 3250lbs 410 gear 4000 stall converter ladder bar car

More gear and converter and I think it's doable..

i hope so,is it goin in a 67 cuda?

Is that 4k convertor taking into account running on E-85?

I know when I switched it really toyed with my torque. Used to run through 1/4 mile traps at 6700. Now I I go through at 6400 in the 1/8th. Atleast with the old set up....

If you are running 29 or 30" tires, did not see in your post, it should be close.

I Agree that it will be close. I think you will just make it in the 9's .
David

Quote:

---

Been a long time coming.Eng is a 493 bb comp. 12.87to1 heads are max wedge ed victors from modern cyl head they flow 366 at 600 lift. Cam is comp 6.43 lift intake dur. 265 at.50 ext dur at.50is 270 intake maifold mopar 337 with alot of port work. rocker arms are t d 1.5 ratio 1050 e85 carb.abody 3250lbs 410 gear 4000 stall converter ladder bar car

---

I'd be surprised if it didn't.