Moparts

{{{ Tunnel Ram Vacuum Question }}}

Posted By: rickstershemi

{{{ Tunnel Ram Vacuum Question }}} - 01/17/11 02:09 AM

OK....can I tap directly into the tunnel ram plenum for the PCV Valve or is it better to go to the carb or should I be pulling from both carbs t'd to the pcv....?????

The reson is it would be a clean direct route from the t-ram to the pcv

Rickster
Posted By: bigtimeauto

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 02:15 AM

either place is fine, whatever looks cleaner would be the best route. me persoanly would drill and tap under the plenum to hide it.
Posted By: MR_P_BODY

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 02:18 AM

Quote:

OK....can I tap directly into the tunnel ram plenum for the PCV Valve or is it better to go to the carb or should I be pulling from both carbs t'd to the pcv....?????

The reson is it would be a clean direct route from the t-ram to the pcv

Rickster




Its all the same vac under the throttle blades...
put it anywhere that looks good
Posted By: DusterDave

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 02:20 AM

Vacuum hoses are ugly. I'd tap the rear of the plenum to keep the hose as out of sight as possible.
Posted By: rickstershemi

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 02:22 AM

Quote:

either place is fine, whatever looks cleaner would be the best route. me persoanly would drill and tap under the plenum to hide it.




Kinda what I thought...and under the plenum sounds like a good idea.....Thanks

Rickster
Posted By: sixpackgut

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 03:12 AM

i wouldnt run a PVC
Posted By: bigtimeauto

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 03:15 AM

If its a street car i would, race car with a power adder i wouln't
Posted By: Quicktree

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 03:41 AM

Quote:

i wouldnt run a PVC


me neither, isn'6t that something plumbers use
Posted By: rickstershemi

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 04:00 AM

Quote:

i wouldnt run a PVC




Me either, but I will run a PCV...

Rickster
Posted By: Cab_Burge

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 04:26 AM

Quote:

Quote:

i wouldnt run a PVC




Me either, but I will run a PCV...

Rickster


Helps keep condesation moisture out of the motor water mixed in oil makes acids
Posted By: sixpackgut

Re: {{{ Tunnel Ram Vacuum Question }}} - 01/17/11 04:38 AM

Quote:

Quote:

i wouldnt run a PVC


me neither, isn'6t that something plumbers use





ooops
© 2024 Moparts Forums