pic's of torque straps

Thinking of fabricating a Torque strap for my Bee. I need some pics for ideas.


Thanks
Kevin

Nice but being mounted on the frame, would you have to think about flexing the body ?

Thanks
Kevin

Been 10.40's with what you see with no frame connectors, stock motor mounts and that strap

I dont have a pic of the torque strap I installed in the Duster.. and its too dang cold to go and take one... but what I did was bought a steel turnbuckle from the local hardware store and bolted one side to the head and the other side to thru a mounting hole for the sway bar in the frame..

Real simple, real cheap and it works well..

Ive got the same thing as Jeepmon -- here :

Now thats the best looking torque straps that I have ever seen. The way it's double plated on the frame won't flex a bit . Mounted on high on the water pump ,torque twist will be more controlled. You should put them on the market, should be able to sell a bunch.

Quote:

---

You should put them on the market, should be able to sell a bunch.

---

Thanks for the kind words. I would try and market them but after doing several other lightweight pieces im burnt out on mass producing this stuff on the side. however i will give anyone that is interested all the dimensional info they need