Posted By: PJ68RT
Would you run this head? - 08/31/10 05:30 PM
Casting flaw in the intake port. Would be going on a mild 440 build. Approx. 425-450 HP. What do ya think? Would this cause issues with leakage? Affect HP?
Would you run this head?
Posted By: MR_P_BODY
Re: Would you run this head? - 08/31/10 05:38 PM
Lay a gasket on it but I'm sure it will seal so yes
I would run it
I would run it
Posted By: buildanother
Re: Would you run this head? - 08/31/10 05:45 PM
Seen a few like that, should be fine. 
Posted By: keelsracing
Re: Would you run this head? - 08/31/10 06:48 PM
have had one with a piece missing between both ports and did not know untill intake was removed that it was like this and could not see anything wrong
so in closing you shoud be fine to run this
so in closing you shoud be fine to run this
Posted By: CompWedgeEngines
Re: Would you run this head? - 08/31/10 08:25 PM
Seal it and run it.