Posted By: blownzoom440
K&N filter big enough? - 05/31/10 05:47 PM
just kidding.i finaly put it on the car. 6"TX9"WX21"L
Quote:
The top of the assembly is supposed to be level with the,, ,,,,,,,,,,,,,,,ROOF Let it EAT!!
Quote:
The diamond plate lid is a nice touch
A few years ago we ran my buddy's 8-71 400 Pontiac without air cleaners on a chassis dyno, and it only picked up about 7hp so we put them back on. The air cleaners were like 9x4 or 5.....he has a whole other setup now though.
Quote:
Cool! Do you have a part number for the filter?
Quote:
Nice look.... Looks familiar to me
Quote:that has less area than a 6pac filter.
taking a page here from Duster Dave's creation
Quote:
Like everything else on this car, nothing was an easy bolt on. Round filter elements would not fit inside the BDS Dominator blower scoop. I came up with a design that uses a flat style K&N filter element. To make it work, I made an aluminum filter base that fits tightly inside the scoop, and is held in place with just one screw. A pair of 3/8" aluminum C-channels and 4 screws holds the element securely in place.