Posted By: demon454
almost done - 04/12/10 01:03 AM
Engine is the demon finally hopefully start it up this week.
![Attached picture 5920356-downsized_0411001804[1].jpg](https://board.moparts.org/ubbthreads/upload2/5920356-downsized_0411001804[1].jpg "5920356-downsized_0411001804[1].jpg")
almost done
Posted By: demon454
Re: almost done - 04/12/10 01:04 AM
another
![Attached picture 5920362-downsized_0411001804a[1].jpg](https://board.moparts.org/ubbthreads/upload2/5920362-downsized_0411001804a[1].jpg "5920362-downsized_0411001804a[1].jpg")
Posted By: WILD BILL
Re: almost done - 04/12/10 01:04 AM
Looks good 
I just put the wheels on mine and put it on the ground tonight
I just put the wheels on mine and put it on the ground tonight
Posted By: demon454
Re: almost done - 04/12/10 01:05 AM
trunk pic
![Attached picture 5920368-downsized_0411001805[1].jpg](https://board.moparts.org/ubbthreads/upload2/5920368-downsized_0411001805[1].jpg "5920368-downsized_0411001805[1].jpg")
Posted By: racerx
Re: almost done - 04/12/10 02:07 PM
Quote:Looks good
Engine is the demon finally hopefully start it up this week.
who's valve covers are they? Thaxx...
Posted By: Cab_Burge
Re: almost done - 04/12/10 06:07 PM
What micron size fuel filter is that before the pump? I hope it is not a BG 500 GPH filter, they are 10 micron according to the servie techs at BG. Way to small for most electric pumps to have before the pump according to the service techs at Magnafuel 
I did the same thing with a BG 500 filter, I'm switchting it to a 70 micron before the pump and I will reuse the BG 500 filter after the pump
I did the same thing with a BG 500 filter, I'm switchting it to a 70 micron before the pump and I will reuse the BG 500 filter after the pump
Posted By: Challenger 1
Re: almost done - 04/12/10 07:45 PM
Quote:
What micron size fuel filter is that before the pump? I hope it is not a BG 500 GPH filter, they are 10 micron according to the servie techs at BG. Way to small for most electric pumps to have before the pump according to the service techs at Magnafuel
Posted By: RyanJ
Re: almost done - 04/12/10 07:47 PM
Looks good Steve....
Posted By: ProSport
Re: almost done - 04/12/10 11:30 PM
That looks nice!!
Posted By: demon454
Re: almost done - 04/13/10 02:13 AM
got valve covers from mancini racing
Posted By: demon454
Re: almost done - 04/13/10 02:23 AM
Quote:
Looks good Steve....
Thanks Ryan and so does ur bee
Posted By: racerx
Re: almost done - 04/15/10 04:11 AM
Thaxx..
Posted By: Ari440
Re: almost done - 04/15/10 04:13 AM
Posted By: demon440
Re: almost done - 04/15/10 04:16 AM
Let's see a side shot of that car.
I need some inspiration.
.jpg "5926368-side(Medium).jpg")
I need some inspiration.
Posted By: Plumb Wired
Re: almost done - 04/15/10 12:21 PM
I thought you had the car sold?
Mike Gray
Mike Gray