interested in a A/W for blow thru?

From his power level and dimensions and looks, I'd say they are garrett cores. Really nice pieces. Much nicer than the spearco/t-netics stuff in my opinion.

well i talked to him and not that he would not do it.he said some1 makes them for about 500$.it was my idea this whole thing.if you dont like the other cores and still interested i will keep talking about it to him.the core shown has 1/2lb drop but at 30 psi.it flows 850hp.for 1,000hp at 14psi lets say a core 4x8x12 wouls be better.the site that sells the cooler for 500$ is on cooled boost or chilled boost.com.i will have to check it out.lets see what is out there.

any core could be used depending on your needs.[made to fit]what shape in/out would suit your needs.slip on hose?V band?i would like to see theis mounted in front of the engine going to the carb and fit well.

i could not find the I/C for 500$ but chiseled performance has something in the 850$ range so you can have an idea what it might cost.the intercooler in the picture above for the motorcycle cost over 1100$.

try www.frozenboost.com thats probably what he was talking about

that looks like it would be it.the largest would be my choice. i dont know about those welds though!