Posted By: Anonymous
Who assembles Mancini Racing's 3rd members!? - 11/13/09 11:03 PM
...a one armed crack monkey!??
Posted By: Anonymous
Re: Who assembles Mancini Racing's 3rd members!? - 11/13/09 11:26 PM
other side:
C'mon, how hard is it to weld to bolts/studs to a piece of bar stock to make sure things like this don't happen?
Posted By: dOc !
Re: Who assembles Mancini Racing's 3rd members!? - 11/13/09 11:35 PM
WOW ....
.....and it is such a simple deal to make the proper tool.
Posted By: Anonymous
Re: Who assembles Mancini Racing's 3rd members!? - 11/13/09 11:38 PM
Quote:
Its also hard to post a pic it appears ?
Yep, my connection hasn't been working properly...
Posted By: dartman366
Re: Who assembles Mancini Racing's 3rd members!? - 11/13/09 11:48 PM
look's to a 8.750, this a all new case and gut's? or a used one that they built up with new gut's if it's a used case then it might of been the one armed crack monkey that had it before they got it.
Posted By: Anonymous
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 12:12 AM
For well over a grand it would be nice to get one that doesn't look like hell...
Posted By: bigdad
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 12:15 AM
Well, yah know the ol saying ..?
Posted By: Anonymous
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 12:18 AM
You know, I almost bought a 742 peg leg case the other day and went through it myself (hell, I did rebuilt everything else in the car..)
I was ordering up parts and decided to splurge and order one with new 3.55 gears and sure-grip the other night.
I'm sure it'll be OK, I was just a little ticked when I opened the bag...
Posted By: bigdad
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 12:21 AM
I've seen way worse , use it ..
Now, where did I leave that 3 lb sledge
Posted By: Anonymous
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 12:28 AM
If nothing else it makes me question the assembly methods on the rest of the unit.
Posted By: Quicktree
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 12:55 AM
really does it make any difference performance wise? you sure can't see it going down the track
Posted By: CJK440
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 01:06 AM
I've rebuilt 3rd members that have adjusters that look as bad. I have a spanner wrench but that doesn't fix what has been done by the guy before me.
May be ugly but its just cosmetic if the gears are setup right.
Posted By: Anonymous
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 01:30 AM
Quote:
really does it make any difference performance wise? you sure can't see it going down the track
Yeah, unless the parts get scattered all over the track....
Can't really tell what the gear pattern looks like but here's a shot of that:
Posted By: DoctorDiff
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 01:46 AM
Judging from the rust on the punch marks, the adjusters got beat up during a previous shade tree rebuild.
Posted By: Anonymous
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 01:49 AM
Quote:
I would be more worried about blowing the main caps off.
9 inches was deemed too..well,...Ford-ish. and therefore inadequate.
Posted By: Anonymous
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 08:56 AM
Mancini built my center section thats in the duster now,looked fine when i installed it and has performed flawlessly..either them or Moser is all i would use for my drivetrain parts
Posted By: hemi471
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 12:55 PM
I think its the same guy who checks the blocks to make sure they are not rusty before they ship to a customer!
Posted By: DaKuda
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 01:20 PM
I have seen WAY worse. As long as its setup correctly I wouldnt worry about it. Mancini is a good shop and good guys.
Posted By: Labratt
Re: Who assembles Mancini Racing's 3rd members!? - 11/14/09 09:56 PM
Seems I heard they send their 3rd member work over to the Ring&Pinion Shop,a couple miles north of them, on Groesbeck,in Clinton Twp.
RandyB
Posted By: bobby66
Re: Who assembles Mancini Racing's 3rd members!? - 11/15/09 08:01 AM
My 3rd member from Mancini was a howler from day 1. Got one from elsewhere and been real happy with it. That said, I still buy from Mancini's once in a while. No more 3rd members, though.