Milodon 30931 B RB Hemi Lo Pro external feed pan

Anyone run the Milodon 30931 B RB Hemi Lo Pro external feed oil pan?

If so how much ground clearance do you have around?

How did you route the external pickup line around the motor mount and ps box?

Im keeping motor mounts on this application.

I'm using this pan on a megablock , plenty ground clearance , i use a sandwhich plate between block & oil pump , the oil line is routed between sump & K frame , i've had zero isues with oil pressure , also have no problems with oil draining back to sump as the feed line comes into top of pump , no need to pull dizzy when motor has been sitting a while.

I also use regular mounts , if i was to come into bottom of pump then i would have had to notch the K frame , i know some don't like this idea , but as said , no issues with oil starvation.

EDIT , i've seen oil pump adapters that exit to the front of motor , had i known @ the time i would probably gone this route.