Posted By: JC Childress
Any pics of 275 drag radial Dusters or Dart sports ? - 10/29/09 03:33 PM
I'd love any info or any pics. Thanks a bunch.
Quote:
67wedge, you don't happen to have a shot of the duster from the rear do you? thx!
Quote:
Man the stance on this thing is absolutely perfect and the 10" 275 combo fits nicely.
If I might derail just slightly,,,
Are these stock springs? How did you get it down in front and back?
Quote:Quote:
Man the stance on this thing is absolutely perfect and the 10" 275 combo fits nicely.
If I might derail just slightly,,,
Are these stock springs? How did you get it down in front and back?
Please post as much info on what was done as possible. I'll be working on mine over the next month and would love to get it to sit just like this!
Quote:
It has the Mopar 3/4" offset spring kit. Caltrac monoleaf springs minus 1 inch with rancho shocks.15x10 Billet Specialties with 5.5 backspace,275/60/Mickey Thompsons,stock width 8 3/4 with drum brakes.The outer wheel lip was trimmed.The front is stock except for caltrac 90/10 shocks and the 318 torsion bars lowered to within 1/2 inch of trimmed bumpstops.When pics were taken it had 165 metric radials on the front which were a little over 25 inches tall. We now have Hoosier 26 inch front runners. Stock inner wheel tubs.
Quote:Do you know by chance if that car is originally from Ohio?
Demon ....close enough
Quote:
Thank you sir! BTW, what engine setup is in the duster?
Quote:
Here ya go...'71 Demon with stock width Dana, 1" lower than stock Calvert mono's.
Quote:
Here ya go...'71 Demon with stock width Dana, 1" lower than stock Calvert mono's.