Posted By: 602heavy
90/10s - 09/13/09 01:29 PM
Fitted the comp engineering shocks & think one shock has been built back to front , the 90/10 setting is set to the XF mark , one of the shocks has to be set to the 50/50 setting for it to be the same rebound as the other shock , this was tested on the bench.
Any thoughts?
Posted By: Dodgem
Re: 90/10s - 09/13/09 05:30 PM
I tried comp no good at best a 70/30 and hard to set right??, carrara and lakewood finally got 90/10
Cal tracs and happy camper now
Posted By: Anonymous
Post deleted by moparts - 09/14/09 04:57 PM
Posted By: 602heavy
Re: 90/10s - 09/14/09 10:32 PM
Spoke with Comp today & they are aware of the problems , they say the 'pin' has moved in the shock which is why one of them does'nt line up with the correct mark.
I can either send them back or just use them as they are , they are both set on the lightest extension irrespective of the marking.
Posted By: mopar dave
Re: 90/10s - 09/14/09 11:24 PM
i have a set under the bench. bought the caltrac 90/10. these caltracs are way better.