Posted By: mt162
Hemi rocker stands - 08/30/09 06:22 PM
Are the aluminum hemi rocker stands all drilled for oiling or are there oiled and non-oiled versions like the cast iron stands?
Hemi rocker stands
Posted By: sasquatch
Re: Hemi rocker stands - 08/30/09 07:26 PM
All the ones I have seen some are some are not. Usually there are the two big end ones, 4 oilers and 4 non oilers. Todd 
Posted By: Mopar_Rich
Re: Hemi rocker stands - 08/30/09 07:29 PM
Stands 2 & 4 are drilled for oil and have an offset dowel pin so you cannot install in the wrong position.
Posted By: Cab_Burge
Re: Hemi rocker stands - 08/30/09 09:17 PM
Quote:
All the ones I have seen some are some are not. Usually there are the two big end ones, 4 oilers and 4 non oilers. Todd
Always check all of them to make sure 