Moparts

msd 6al problems

Posted By: GEORGE68HEMIRR

msd 6al problems - 08/18/09 12:32 AM

just talking to a buddy and he went out for a blast in his shoebox nova....going through the gears he noticed 8500rpms on his tach in second then 3rd....hes tell me his rev limiter in his msd 6al is toast....anybody here have the same problem....this could be my problem also....but mine was the other way around....tach was below what it was suposed to be
Posted By: therocks

Re: msd 6al problems - 08/18/09 01:07 AM

6al takes pills or you need the adjustable box.Is the tach bot reading correct is that the question?Or isnt it hitting the limiter?Rocky
Posted By: GEORGE68HEMIRR

Re: msd 6al problems - 08/18/09 01:29 AM

Quote:

6al takes pills or you need the adjustable box.Is the tach bot reading correct is that the question?Or isnt it hitting the limiter?Rocky



the 6al takes the pill or you can plug in the MSD module selector which has a dial and you can adjust 200 rpms at a time.....mine goes from 6000rpm to 8200rpms....
to me it seems the box is telling the tach the wrong rpms because its breaking up which means i am running into the rev limit i set it for....
i shifted at 6800 on the tach...its breaking up...i set the limiter for 7200 and its telling my tach its 6800
Posted By: therocks

Re: msd 6al problems - 08/18/09 02:52 AM

Some tachs wack our with the MSD.Id call them and see what they say.My tach will jump sometimes.I have the limiter at 6800 in my 440 and can push more but the 3.91s arent enough for top end.My shift light comes on at 6500 runnign 4 speed.Rocky
Posted By: GEORGE68HEMIRR

Re: msd 6al problems - 08/18/09 02:57 AM

just ordered the 6al-2....i have the autometer monster tach with shift lite and has been working fine for about 10 years now.....my fingers pointing at the box
© 2024 Moparts Forums