Posted By: moparniac
Milodon Gear Drive / Super Dampner ??? - 07/30/09 04:23 PM
Anyone know what the part number is for a ATI superdampner thats compatable with a Milodon gear drive.... also what is the little hole on the left side of the milodon gear drive unit for? thx
Posted By: BILLYJAY
Re: Milodon Gear Drive / Super Dampner ??? - 07/30/09 04:31 PM
i just bought a ATI Damper(917122E)it was the wrong one.. and if you buy through jegs or summit they dont have the part number listed..i have a Indy timing cover and needed a 1/4" longer hub.. but instaed i had to buy the shim kit to make mine work..call ATI directly and get the right part number.. they offer 22 applications for BB dodge..
http://www.atiracing.com/products/dampers/index.htm 877-298-0539 speak to jim Beaty.. tell him your application..the part # for the correct hub should be 916663 but double check...
Posted By: moparniac
Re: Milodon Gear Drive / Super Dampner ??? - 07/30/09 04:36 PM
thx... anyone know what the little hole in the side of the milodon gear drive is for..... never ran one before.. thx
Posted By: PolyDart
Re: Milodon Gear Drive / Super Dampner ??? - 07/30/09 04:40 PM
Just went through this. I ended up with an ATI hub number 916663 as was mentioned above.
As for the hole, if it's the one I'm thinking of it's for the timing pointer.
Posted By: MoparMuscle
Re: Milodon Gear Drive / Super Dampner ??? - 07/30/09 04:41 PM
At the top of page six in the race parts for sale there is one listed as being for a gear drive.
Posted By: galen
Re: Milodon Gear Drive / Super Dampner ??? - 07/30/09 06:05 PM
ATI will sell just the hub if you need it. They sent it right out. I cant find my invoice but the hub was $135. It fit like a glove.
Posted By: bigtimeauto
Re: Milodon Gear Drive / Super Dampner ??? - 07/31/09 01:19 AM
Wedgie, i have one for sale if your interested.35 passes. The 916663 hub with a 2 ring damper (works with a belt drive) with the timing marks the correct way.
Posted By: AndyF
Re: Milodon Gear Drive / Super Dampner ??? - 07/31/09 01:35 AM
If you look on the ATI website you'll see the product listings for a gear drive. There are several different ones that will fit depending on if you want aluminum or steel, two ring or three ring, Chevy bolt pattern, etc.
Posted By: moparniac
Re: Milodon Gear Drive / Super Dampner ??? - 08/03/09 10:05 PM
well I just traded a edelbrock rpm intake for a ATI damner....
part# 916621
Hub part# 916661L
Will it work for a milodon gear drive?
Posted By: hemi-itis
Re: Milodon Gear Drive / Super Dampner ??? - 08/03/09 11:15 PM
Which hole are you referring to?
