Posted By: Jambbii
Aluminum trans pan (727) - 07/14/09 05:20 PM
I'm looking for what that is not too much deeper than stock. The car is going to be low and I don't want anything below the headers.
Thanks,
Josh
Posted By: rebel
Re: Aluminum trans pan (727) - 07/14/09 06:48 PM
stay away from the B&M then, tooo deep. i bought a TCI it doesn't hold as much as the mp chrome deep pan but does hold more than stock.
Posted By: dOOc
Re: Aluminum trans pan (727) - 07/14/09 07:00 PM
If you don't need or want the depth ..I would just stick with a deep stamped-steel pan.
Posted By: RAT PATROL
Re: Aluminum trans pan (727) - 07/15/09 01:46 PM
Moroso pan here too, along with some nice MCH stuff.
Posted By: Anonymous
Re: Aluminum trans pan (727) - 07/15/09 02:03 PM
A later 518 pan is a deeper sump, has a location for a magnet in the corner, and has a black coating (powder?) that is ultra tough! Best of all I can get them used dirt cheap through my local transmission shop! The last one cost me $13.00.
You do have to buy a filter extension but those are pretty easy to find.
Posted By: 74_360_Cuda
Re: Aluminum trans pan (727) - 07/15/09 04:01 PM
What about Summit?
Looks like a trickflow...
Posted By: Bob_Coomer
Re: Aluminum trans pan (727) - 07/15/09 04:54 PM
The MP unit can be had through Mancini works well, and comes with everything too...The best is the price.
I got the NON Chrome Version
http://chucker54.stores.yahoo.net/mopa719andla.html
Posted By: Anonymous
Re: Aluminum trans pan (727) - 07/15/09 05:01 PM
Quote:
and comes with everything too
Yep, even that crappy filter extension!
That is a good deal....
Posted By: Anonymous
Re: Aluminum trans pan (727) - 07/15/09 05:20 PM
If you lift your left leg, hold your tongue against your right cheek and hop up and down you may get it installed quickly the first time.
They're just a multi piece PITA!
The billet is a much simpler and smarter design.
Posted By: Sam Robinson
Re: Aluminum trans pan (727) - 07/15/09 05:46 PM
Stef's pan here. Fits good and looks good.
Posted By: 74_360_Cuda
Re: Aluminum trans pan (727) - 07/20/09 04:45 AM
Did anyone ever tried the trick flow pan?
At 130$ (Summit) it looks like a bargain compared to the Mopar at 260$...
2 additionnal qt is good enough for me (street only).