Me too..

Posted By: lenweiler

Me too.. - 06/14/09 10:48 PM

I ran a best this Fri., so I suppose I'm one of the blessed too.

1rst real pass (kind of), we ran a 10.81 @ 128 with a lack luster 60ft. My fault. Didn't really do a burnout.
2nd and final pass, with a better burnout, too much tire pressure, we ran a 10.35 @129.34 MPG. Really pulling hard all the way now. Ryan was right though. This thing could use more cam.....

Posted By: Moparmatty

Re: Me too.. - 06/14/09 11:03 PM

Good work Len!

Posted By: Ian

Re: Me too.. - 06/15/09 01:39 AM

Quote:

I ran a best this Fri., so I suppose I'm one of the blessed too.
1rst real pass (kind of), we ran a 10.81 @ 128 with a lack luster 60ft. My fault. Didn't really do a burnout.
2nd and final pass, with a better burnout, too much tire pressure, we ran a 10.35 @129.34 MPG. Really pulling hard all the way now. Ryan was right though. This thing could use more cam.....

hi len is that with the -1 cnc on it ,that's still quick mate what cam is in it and what will you change it to.thanks ian

Posted By: lenweiler

Re: Me too.. - 06/15/09 11:10 AM

That is with W5's done be Ryan. Max flow is around .700" lift at around 325 cfm. I'm running a mildish Crane roller with 260/266 dur. at .050". Think it could use a little more, like 270 area. Talk to Ryan when it comes time. He's done a pile of r&d work.