LOOKING FOR MOPAR BILLET UPPER COILOVER ADAPTERS

Does anyone out there make these adapters besides Magnum Force ?
[img]https://www.magnumforce.com/mopar-billet-upper-coilover-adapters/p144[/img]

did you check with qa1

They are basically a very specific product. Never seen anyone else have them....I have a set on each of my cars...

looks like this could be made to work ?

They look a bit thin & flimsy to me. I think I would make my own or do a decent drawing & get a machine shop to fabricate them, even better if you know a friend with a mill

https://freakride.com/
How about these guys, seems like they have some pretty good stuff. Was just referred to me the other day

http://www.moparsuspension.com/torsion-bar-eliminator.html

Not many options out there

I have a pair that were used on a e body Cuda, machined alum w/ hardware $150 shipped I can get pics on Friday text 561 906 0480

There is an AFCO bolt in double adjustable shock that could be used in their place. 3850M is the part number. There is a single adjustable version also.

https://www.afcoracing.com/store.as...oil-over-Double-Adjustable-Mopar-Front--

I made my own, out of 1/4 wall steel square tubing. If you have a drill press, chop saw and an angle grinder, you are in business!

these are what you are looking for?

For mustangs, used with rear coilovers