Posted By: 1savoyracer
valve cover gaskets - 09/26/22 12:20 AM
going to replace mine, one of them leaks at the rear of the valve cover, and i cannot stop it, what is a damn good gasket to get and use?..........i just want to get the best gasket possible
Posted By: birdtracker
Re: valve cover gaskets - 09/26/22 12:34 AM
what heads and what valve cover? Birdtracker
Posted By: jcastle1
Re: valve cover gaskets - 09/26/22 12:41 AM
Moroso Perm-align valve cover gasket set for 383-400-440
Part # 93055
They do not leak. (and are re-useable)
Posted By: 1savoyracer
Re: valve cover gaskets - 09/26/22 12:58 AM
Indy 440 heads....stock chromed valve covers
Posted By: racerx
Re: valve cover gaskets - 09/26/22 01:46 AM
Surprise no one said super performance valve cover gasket here. Mine has developed a leak at the back as well, i manage to put a dap of silicone on it for now i'll get a new set over the winter.
Posted By: AndyF
Re: valve cover gaskets - 09/26/22 03:36 AM
Get rid of the chrome valve covers and your leak will go away. Use a cast valve cover with a machined rail and you won't have any leaks. Indy makes a good valve cover or Trick Flow or others. I think the Cometic rubber valve cover gasket is the best on the market but you really shouldn't have any leaks with even a cheap gasket if you have two smooth and rigid surfaces that you are sealing.
Posted By: Cab_Burge
Re: valve cover gaskets - 09/26/22 05:47 AM
SCE cork and rubber combination, works great and lasts a long time with a lot of use on adjusting the valves on my old drag race motors
Posted By: DusterKid
Re: valve cover gaskets - 09/26/22 11:21 AM
We always used cork with the Chrome valve covers. They were only able to be used once and then had to be thrown away. I have since bought Mopar Performance Cast valve covers and Moroso blue rubber gasket with steel core. They have been on the car at least 10 years and the gaskets reused many many times without any issues.