Posted By: fastmark
Hardened rocker shafts for BB - 09/20/22 11:16 AM
I need several sets of hardened rockers shafts for some customers. I will be using them on isky iron rockers so I would prefer them to have the grooves like TA rockers have. Anyone know of a supplier for those?
Posted By: SportF
Re: Hardened rocker shafts for BB - 09/20/22 08:54 PM
Stanke Motorsports
https://stankemotorsports.com/index.cfmHe makes them in house, and supplies a lot of engine builders
Posted By: fastmark
Re: Hardened rocker shafts for BB - 09/21/22 10:46 AM
Sounds like what I need guys thanks.
Posted By: blue_stocker
Re: Hardened rocker shafts for BB - 09/21/22 08:39 PM
You might try Gary Patrick at RAS/RAU...
http://www.rockerarms.com/
Posted By: polyspheric
Re: Hardened rocker shafts for BB - 09/21/22 10:24 PM
When you assemble the rockers on the engine, make sure none of the grooves locates between a rocker and a stand: oil pressure leak.
Posted By: fastmark
Re: Hardened rocker shafts for BB - 09/22/22 09:18 AM
Just talked to them at length about rebuilding a set of Isky rockers. He has not made any in awhile from Mopars because he’s too busy and material is hard to find. He recommended Stanke.
Posted By: Brad_Haak
Re: Hardened rocker shafts for BB - 09/22/22 05:11 PM
Interesting, but not surprising considering the current state of things.
FWIW, my RAS shafts are the nicest shafts I've had; I just keep giving them a touch-up polish and reusing 'em. The only other shafts that look as thick-walled to me are the Harland Sharp shafts.