Posted By: tvt59
TF904 BILLET OUTPUT SHAFT - 08/11/22 07:52 PM
Trying to find a billet output shaft for a TF904.
Thanks
Thanks
TF904 BILLET OUTPUT SHAFT
Posted By: 440Brian
Re: TF904 BILLET OUTPUT SHAFT - 08/11/22 08:09 PM
Have you tried Pro Trans Racing in Waco, TX 254-749-5689 ?
Posted By: tvt59
Re: TF904 BILLET OUTPUT SHAFT - 08/11/22 08:26 PM
Pro trans and A&A are out of them.
Posted By: LA360
Re: TF904 BILLET OUTPUT SHAFT - 08/11/22 09:45 PM
What are they worth these days?
Posted By: J_BODY
Re: TF904 BILLET OUTPUT SHAFT - 08/12/22 02:52 AM
Being Pro Trans makes them you might be out of luck unless someone is sitting on one
Posted By: tvt59
Re: TF904 BILLET OUTPUT SHAFT - 08/12/22 12:22 PM
A used one is probable $300.00 a new one is probably $500.00. but I don't know for sure.
Posted By: tvt59
Re: TF904 BILLET OUTPUT SHAFT - 08/12/22 12:26 PM
I'm hoping that someone may have one pidgin holed up.
Posted By: J_BODY
Re: TF904 BILLET OUTPUT SHAFT - 08/12/22 01:19 PM
Did you break one? I have at least two friends that have broken shafts, but so far I’ve dodged that bullet. 
Posted By: 340Cuda
Re: TF904 BILLET OUTPUT SHAFT - 08/12/22 03:03 PM
If you have not done so already I would check with Cope, ATI and Joel on Joy,
Posted By: 440lebaron
Re: TF904 BILLET OUTPUT SHAFT - 08/12/22 03:09 PM
Posted By: tvt59
Re: TF904 BILLET OUTPUT SHAFT - 08/12/22 04:52 PM
TCS dosen't make one for a 904.
Posted By: tvt59
Re: TF904 BILLET OUTPUT SHAFT - 08/12/22 04:53 PM
Have check Cope and ATI. Who is the outer guy?
Posted By: LA360
Re: TF904 BILLET OUTPUT SHAFT - 08/15/22 01:04 AM
http://tcsproducts.com/products/subcategory/a904/
As you can see, TCS don't make them.
I think it's only Pro Trans that does make the A904 shafts
As you can see, TCS don't make them.
I think it's only Pro Trans that does make the A904 shafts
Posted By: tvt59
Re: TF904 BILLET OUTPUT SHAFT - 08/15/22 07:34 PM
A&A MAKES THEM BUT HAVING A LITTLE TROUBLE CATCHING UP WITH THEM. BUT I THINK THEY WERE AT THE CAR SHOW LAST WEEK. SORRY ABOUT THE ALL CAPS