Mahle dealer?

Any of you guys a vendor for Mahle?

Looking for a set of 930270140

Thanks

If you don't find a dealer here, I bought mine through Jegs.

They were $100 cheaper than Summit for the set.

I buy direct. However, I do buy 50 sets at a time for several different bore sizes and different combinations. They may still sell direct to you.

I think these are currently the best piston for the money. I also like that they sell just the stainless nitrided top ring instead of having to having to buy the entire ring pack. Works out to be about $100 cheaper that way.

FWIW if you can find somebody with an Atech (Summit Wholesale) account the piston set will be about $100 less expensive (in my experience).

Finder's fee if somebody can find me a set

Summit says July 13th for that set. The last Mahle pistons kit I bought was listed two weeks out yet it was on my door in less than a week.

https://www.summitracing.com/parts/mle-930271040t

CNC Motorsports says they have a set in stock.

An email to Mahle North America Sales should help you locate a set: motorsport.sales@mahle.com

I usually buy my pistons from CNC Motorsports and just did some price shopping.

Jeg's are cray priced at $995.99

Summit Racing price $747.35

CNC Motorsports $747.35 Plus you free piston rings and they never charge me sales tax. https://cnc-motorsports.com/mahle-pistons-930270140-forged-flat-top-sb-mopar-4-040-bore.html


Time to buy.

Tom

I searched the part number on googke and found s place that had them for $654, backorder but suggested they eould ship in a few weeks.
Took a chance coz the price wss good. Emailed a week later to ask about tracking and such. They said they should ship on the 24th. They showed up today. Glad that worked out!!