Biow proof bell small block ?

hi ,

need a blow proof bell for a small block 340 mopar .

does anyone make one that has a removable bottom to be able to inspect or change clutch without total removal ?

other wise if not who makes or has the old standby one piece ?

thank you !

For a 10.5 or 10.95 / 130 tooth fluwheel single disc b&b clutch sstup the Quicktime is okay with some minor modification.

If I was going to get a new bell with a removable window I would call Quicktime and see what they can do in the custom shop. Anything that uses a 143 tooth flywheel requires a Lakewood which is the rather bulky 15335 model. Get out the hammer.

Beyond that you could call Browell and see what they can do for a door car. Not sure how they hande the z bat mounts, etc.

Are you running an a833?

If you don’t mind the size, find a used Lakewood. You can find them on feebay and on forums like this pretty regular. Then you call Lakewood (freaking Holley) and have them set you up to put a window in it. When it comes back it will have the window, a new cert and it will look like brand new. Also, ask for the big window. They have 2 sizes and the big window makes adjustments a bit quicker. I have the small window and I can do an adjustment in 12-15 minutes. Less if I’m just adjusting base pressure.

PM sent