Posted By: feets
Why are you people letting me work unsupervised? - 06/28/21 05:02 AM
I primed the oil system today on the 541. It took surprisingly little effort to hit 20 psi. The drill was barely moving.
Spinning it a little faster saw a max of 75 psi.
Then, my faithful assistant turned the crank so we could verify oil to the rockers.
Someone really should have reminded me that the Comp roller rockers have oil holes on the top.
Did you know that with 75 psi you can spray 8 perfectly straight streams of oil and hit the lathe 17 feet away?
Spinning it a little faster saw a max of 75 psi.
Then, my faithful assistant turned the crank so we could verify oil to the rockers.
Someone really should have reminded me that the Comp roller rockers have oil holes on the top.
Did you know that with 75 psi you can spray 8 perfectly straight streams of oil and hit the lathe 17 feet away?