Moparts

Headers for a 64-65 Plymouth with a Hemi

Posted By: Al_Alguire

Headers for a 64-65 Plymouth with a Hemi - 05/11/21 07:59 PM

Like it says. Does anyone make a GOOD set of headers for a Hemi in a 64/65 Plymouth? Auto(non push button smile ) if it matters. Or am I better off just building a set? Not looking for every ounce of performance but say something that can handle 950ish HP with an Indy head.
Posted By: JERICOGTX

Re: Headers for a 64-65 Plymouth with a Hemi - 05/11/21 08:01 PM

Which K member is in the car? I'm sure you are running a motor plate, but where the engine is mounted will be key. TTi, should have something.
Posted By: an8sec70cuda

Re: Headers for a 64-65 Plymouth with a Hemi - 05/11/21 08:04 PM

I was gonna say TTI, but they only have a 2.25" primary header w/ 3.5" collectors for stock port location heads in that bodystyle. down
Posted By: Al_Alguire

Re: Headers for a 64-65 Plymouth with a Hemi - 05/11/21 08:12 PM

Motorplate, stock K member. Whole car is stock stuff windows body etc all steel and all glass.
Posted By: sasquatch

Re: Headers for a 64-65 Plymouth with a Hemi - 05/11/21 09:40 PM

TTi makes a 2.250 header for it but with a aftermarket no torsion bar front end. Stick a stock 1966 UP B body K member under it. Problem solved.
Todd
Posted By: EvilB1Dart

Re: Headers for a 64-65 Plymouth with a Hemi - 05/12/21 12:00 AM

Al,

You have the skill, so build a set. You'll thank yourself later, and less curse words LOL.

Wes
Posted By: J_BODY

Re: Headers for a 64-65 Plymouth with a Hemi - 05/12/21 12:25 AM

Well just load it up and drop it off in Kingman! While Greg is doing what he does best I’ll buy at the Rickety Cricket....... oh yeah. You moved!! laugh2
Posted By: cudaman1969

Re: Headers for a 64-65 Plymouth with a Hemi - 05/12/21 01:24 AM

I think whatever fits an a-body will fit an early b-body
Posted By: Cab_Burge

Re: Headers for a 64-65 Plymouth with a Hemi - 05/12/21 02:05 AM

Originally Posted by cudaman1969
I think whatever fits an a-body will fit an early b-body
iagree On 1967 to 1973 A bodies with hemi motors with the tranny mount in the stock A body locations, I've swap more than one set of Hooker chassis headers between those cars and the 1966 to 1971 B and E bodies shruggy
Posted By: DoubleD

Re: Headers for a 64-65 Plymouth with a Hemi - 05/12/21 11:20 AM

The TTI 2 1/4 fit real good on my 64 Dodge with Edelbrock Victor jr. Heads - Its on a motor plate - You can order the headers from TTI with a race collector verses the 3 1/2" I can have my headers off in about 30 minutes on the lift
Posted By: Al_Alguire

Re: Headers for a 64-65 Plymouth with a Hemi - 05/12/21 01:44 PM

J was looking for an easy option, but you know with me nothing is easy.

Evil1 Yes we can build them and have, but honestly Jay's suggestion is what usually happens. Just way quicker and usually not alot more $$

Looking like the Indy head is going to cause the issues here from what I read anyway. Thanks for the replies, just thinking aloud right now as I continue to look for a new hoopty
Posted By: maximus

Re: Headers for a 64-65 Plymouth with a Hemi - 05/13/21 11:42 AM

I have used TTI on my 500" wedge 64 Plymouth with same setup as yours. They were the easiest headers I have ever installed. Turn the steering wheel in one direction and install header, then turned the wheel the other direction and installed the other side. Would buy them again for a 64,65 Plymouth. I would think with the Hemi would be even easier because of the head exhaust angle. I have a set on my 68 Hemi Dart and fit in fairly easy also, being an A body and less room.
Posted By: HardcoreB

Re: Headers for a 64-65 Plymouth with a Hemi - 05/14/21 02:16 PM

Originally Posted by Al_Alguire
...Hemi in a 64/65 Plymouth?

Whoa !? lol
Posted By: cuda499

Re: Headers for a 64-65 Plymouth with a Hemi - 05/14/21 06:36 PM

Originally Posted by Al_Alguire
J was looking for an easy option, but you know with me nothing is easy.

Evil1 Yes we can build them and have, but honestly Jay's suggestion is what usually happens. Just way quicker and usually not alot more $$

Looking like the Indy head is going to cause the issues here from what I read anyway. Thanks for the replies, just thinking aloud right now as I continue to look for a new hoopty



I have the headers from my indy heads, but they are 2.5 inch with 5 inch collector for an E body with a Bob's front end.
Posted By: Al_Alguire

Re: Headers for a 64-65 Plymouth with a Hemi - 05/16/21 05:54 PM

Originally Posted by HardcoreB
Originally Posted by Al_Alguire
...Hemi in a 64/65 Plymouth?

Whoa !? lol


Lets just say one followed me home the other day. Was just gonna sell it but thinking might be cool in a certain 64 Savoy I know of smile
Posted By: hemicar1971

Re: Headers for a 64-65 Plymouth with a Hemi - 05/16/21 07:50 PM

The best under chassis set I have ever taken a good look at are the ones on the N.Super Stock 1965 Belvedere owned by the guy in Canada. It is the car Tom Orlando use to own.and raced. Guys like Jim Hale, Jack Werst, Joe Teuton, all owned this car but I think Teuton never raced it. It is a Legal SS/BA car but runs in N Super Stock with a Big Hemi and Mil. Stage V Heads. If you want contact information of the owner PM me.
Posted By: John Burdine

Re: Headers for a 64-65 Plymouth with a Hemi - 05/17/21 03:19 AM

Originally Posted by Al_Alguire
Originally Posted by HardcoreB
Originally Posted by Al_Alguire
...Hemi in a 64/65 Plymouth?

Whoa !? lol


Lets just say one followed me home the other day. Was just gonna sell it but thinking might be cool in a certain 64 Savoy I know of smile


Do a build thread, start to finish, many pics along the way.
© 2024 Moparts Forums