Oil filter fitting - Moparts Forums

Posted By: LSP

Oil filter fitting - 04/24/21 02:30 PM

Anyone sell the oil filter attachment fitting that has the 3/8" square drive in the center?

Thanks

Posted By: Moparrob68

Re: Oil filter fitting - 04/24/21 03:29 PM

Hughes has one with an external hex.

Posted By: LSP

Re: Oil filter fitting - 04/24/21 04:08 PM

Originally Posted by Moparrob68

Hughes has one with an external hex.

Yes I have that one, looking for the other style.

Thanks

Posted By: 440Jim

Re: Oil filter fitting - 04/24/21 05:16 PM

Originally Posted by LSP

Anyone sell the oil filter attachment fitting that has the 3/8" square drive in the center?

Thanks

What "attachment" are you looking for? The threaded part that screws into the pump and the filter spins onto?

Posted By: Cab_Burge

Re: Oil filter fitting - 04/24/21 06:54 PM

Mopar made that fitting in several different versions, the internal 3/8 square was the best one IMO

Posted By: Bad340fish

Re: Oil filter fitting - 04/24/21 07:10 PM

Originally Posted by Cab_Burge

Mopar made that fitting in several different versions, the internal 3/8 square was the best one IMO

I like the external hex because it has more area for flow in the middle.

Posted By: tubtar

Re: Oil filter fitting - 04/24/21 07:27 PM

Just plugged a Canton block plate / fitting into a deal I am doing.............7/8" or 1 "external hex as I recall , and full 1/2" internal passage.
Came with the plate , but maybe they sell them separately.

Posted By: moparx

Re: Oil filter fitting - 04/25/21 06:31 PM

i thought i had one on the shelf, but i couldn't find it when i looked.........

sorry.

Posted By: Stanton

Re: Oil filter fitting - 04/25/21 09:13 PM

Use the Viper fitting p/n 53007563 and drill it out to 1/2"