What are you using for e-vac tubing .

Other than using rubber hose what are you using? Looking for something flexable and heat tolerant.

I’m using some clear tubing that is reinforced with what looks like white nylon strands around it. I can’t think of what it’s called. I’ve tried several different types of tubing and most of them would at least partially suck shut. Clear tubing with no reinforcement would suck completely shut. So did rubber heater hose.

stainless braided hose

-12

I use thick clear hose from lowes. . I like to see what's going on.

Look up silicone vac hose on google, It's available in any color under the sun. Far superior to rubber.

Thanks for posting the pictures. That’s the tubing I use and was talking about. Much better to see a picture of it.

Clear tubing from Loews as well. Completely clear so I can see what's coming out. It gets stained so I replace it regularly. Pretty tough. Never had it collapse.