Jones Racing crank pulley

Hola!
Do any fellow Moparites have personal pic(s) of the Jones Racing double v-groove crank pulley #CS-3102-CH? Any dimensions? Depth? Offset? etc? My understanding is it 's 5.2" in diameter, but I have little else except a crappy pic on their website.

Also, does anyone have a crank pulley to power steering pulley ratio calculator link? Is is calculated on minimum rpm or maximum rpm, or other?
Thanks,
Moparteacher

Give them a call, but expect to talk for a while, they won't you off the phone until they are sure they got it right.


Joe

I called them today. They seemed very busy so I thought I would utilize additional sources of knowledge and experience prior to calling back. Thanks.

P/S is calculated on pump speed. Most pumps are cavitating at anything over 6000 rpm, so try and match your max engine RPM to turn the pump 6K.