.001 extra clearance bearings

.001 extra clearance bearings - 02/14/21 03:40 PM

Help a backwards reading guy out.

Which part number in the circle would give me the EXTRA .001 oil clearance.

THANK YOU!

Attached picture thumbnail_102_6707.jpg

Posted By: Moparite

Re: .001 extra clearance bearings - 02/14/21 04:45 PM

Depends on the crank size, Mike it and go from there.

Posted By: Wirenut

Re: .001 extra clearance bearings - 02/14/21 04:54 PM

I would think the over is actually a thinner bearing , but would call them to confirm .

Posted By: '72CudaRacer

Re: .001 extra clearance bearings - 02/14/21 04:55 PM

The top one.

Brian

Posted By: 340Cuda

Re: .001 extra clearance bearings - 02/14/21 04:56 PM

Over to increase clearance, under to decrease clearance.

Posted By: Cab_Burge

Re: .001 extra clearance bearings - 02/14/21 07:20 PM

Order both sets and verify with your tools

Return the unused set

Please let us know your results

All the over sized ones I've check have been under sized, not over sized

Trust, but verify

Posted By: Wirenut

Re: .001 extra clearance bearings - 02/14/21 07:22 PM

Originally Posted by Cab_Burge

Order both and verify on your tools

Return the unused set

Wisdom

Posted By: sasquatch

Re: .001 extra clearance bearings - 02/14/21 09:12 PM

Unless your the parts guy who now cannot sell the opened bearings.

Posted By: 6PakBee

Re: .001 extra clearance bearings - 02/14/21 09:16 PM

Did you find someone who had those for sale? I thought they were NS'd.

Posted By: Mr PotatoHead

Re: .001 extra clearance bearings - 02/14/21 09:42 PM

Yes, I had a want ad in the engine section. I will probably just pick up both sets and then if I ever need to tighten one up I will have them.

Originally Posted by 6PakBee

Did you find someone who had those for sale? I thought they were NS'd.