Posted By: randavis
Who to use for rebuild in KC area - 12/06/20 03:54 PM
My 440 has developed a miss, which I believe is due to broken rings (again). I have a spare block, but it will need boring, line boring, decking, etc. from sitting for 30 years under the bench. I am not looking to race it, just occasional spirited driving. Somewhere in the neighborhood of 450 to 500 hp. I am looking at either E-Street or 440 Source stealth heads. I will use the Torker II and the Holley Sniper from my old engine. I'll need rods and pistons and a cam package.
My old machine shop has changed hands and I am not sure about the quality of work coming from there. Most of the people I know run GM. Their guys don't know Mopar.
Who would be a decent shop to work with in the Kansas City metro area?
Thanks
My old machine shop has changed hands and I am not sure about the quality of work coming from there. Most of the people I know run GM. Their guys don't know Mopar.
Who would be a decent shop to work with in the Kansas City metro area?
Thanks